The quality of a coating — whether a liquid paint, a protective coating, a resin or a powder coating — depends decisively on heat treatment. Drying and curing must take place at the right temperature, with the right uniformity and for the right length of time: only then does the coating fully develop its adhesion, hardness, chemical resistance and appearance.
AMARC designs and manufactures industrial ovens and heating systems for the entire coatings supply chain: from paint and coating manufacturers, who need to preheat resins and components in drums and IBC tanks, to applicators, who need drying and curing ovens that are reliable, uniform and safe, even where solvents are involved.
The heat treatment of coatings brings challenges that everyone in the sector knows well: temperature uniformity inside the oven chamber, an essential condition for even curing across the whole surface of the part; the **management of solvents released during drying, which calls for ovens compliant with the EN1539 standard in order to operate safely; the preheating of resins, binders and paints stored in drums, to bring them to working or application viscosity; the repeatability of thermal cycles, to guarantee constant quality batch after batch; and cycle times, which must be compatible with the pace of production.
From curing composite materials to drying solvent-based coatings, AMARC has built up hands-on experience in the sector’s most demanding thermal processes. Every oven is sized on the customer’s specifications: part dimensions, thermal cycles, throughput, safety. All products have been ISO 9001 certified since 2001, are designed to run 24/7 for 25 years and are backed by continuous support.
Drum Heating Cabinets for drums and IBC containers
AMARC drum heating cabinets simultaneously heat multiple 200 L drums or 1000 L IBC containers, bringing oils, paraffins and chemical products up to process temperature with high uniformity. Available in configurations ranging from a few units to dozens of drums, with sliding doors, PLC management and special constructions on request.
Drum Heaters
For heating individual containers, AMARC drum heaters are the flexible, ready-to-use solution: ideal for melting paraffins, oils and chemical products directly in the drum, with precise temperature control.
EN1539 Ovens for Solvents and Flammable Substances
When the thermal process releases solvents or flammable vapours, safety leaves no room for compromise. AMARC ovens compliant with EN1539 ensure proper air exchange and the safe management of drying and heating processes involving petrochemical products.
Industrial Ovens
Air convection ovens with operating temperatures up to +250°C, for drying, polymerisation and stabilisation processes of products in the petrochemical sector.
Ovens for curing composite materials, dryers for industrial drying processes, EN1539 ovens for solvent-based paint products: discover the projects AMARC has delivered for the world of coatings.
No results found.
Looking for an oven to dry or cure your coatings?
Tell us about your process: our engineers will design the most uniform, safe and efficient thermal solution for your production.
Call Us
+39 039 578 051
Write to us
mail@amarc.com
Fill in the form with no obligation to be contacted.
Fill in the form with no obligation to be contacted.
Fill it in with your details to be contacted back.
